Detaching and Attaching of Parts Instructions for Dissassembly and Assembly
5-60
Attaching
1.
To attach, reverse the detaching procedure.
When attaching the Lower Feed Roller Assembly [3], attach it with the left and right
Gear Cams [5] and the Gear P.C. [6] as in the figure below.
[5]
[6]
Fig. 5-71: Lower Feed Roller Assembly, Step 2
Note 2: Be sure to adjust the gap between the Print Head (24L) and the Platen
Assembly (refer to Section 6.1).
[3]