Tally T2030/24 Maintenance Manual page 115

Instructions for Dissassembly and Assembly Detaching and Attaching of Parts
12. Remove the three screws [15] that have been securing the CA Motor (HB) [14],
and detach the CA Motor (HB) and the S. K. Earth PL A [16].
Fig. 5-40: CA Motor (HB), Step 5
Attaching
1. To attach, reverse the detaching procedure.
Note 1: When attaching the CA Motor (HB), be sure to attach it at the position where
the cable come out to the left side.
Note 2: When attaching the Ribbon Gear Holder Assembly, be sure to secure them
by fitting the Pulley Flange A [10] and the Pulley A Assembly [11] together, as in
Fig. 5-41.
[15]
[16]
[14]
5-31