Tally T2030/24 Maintenance Manual page 100

Detaching and Attaching of Parts Instructions for Dissassembly and Assembly
5-16
Attaching
1. To attach, reverse the detaching procedure.
Note 1: When attaching the Earth PL B [17], be sure to attach it so that it can contact the
shaft of the Lower Feed Roller Assembly [19] and the Upper Feed Roller Assembly [20].
[17]
Fig. 5-21: EMI 1 Wire, Earth PL B, Earth PL C, Earth PL (8), Support Plate,
Earth PL (10), Step 6
Note 2: When attaching the Earth PL (8), be sure to attach it so that it can touch the
Carrier Shaft and the shaft of the Pinch Roller (1).
Note 3: When attaching the Earth PL C and fastening it to the Platen Assembly, be
sure to secure it while holding the Platen Assembly down.
[20]
[19]
[17]