Detaching and Attaching of Parts Instructions for Dissassembly and Assembly
5-54
Attaching
1.
To attach, reverse the detaching procedure.
Note 1: When attaching the Platen Assembly [3], attach it so that the [5] part of the
Platen Assembly can come to the Frame (L) Assembly.
[5]
Fig. 5-65: Platen Assembly, Step 2
Note 2: When attaching the Platen Assembly, secure it while pressing it towards the
Platen Assembly bottom.
Note 3: Be sure to adjust the gap between the Print Head (24L) and the Platen
Assembly (refer to Section 6.1).
[3]