Tally T2030/24 Maintenance Manual page 27

Activating Principles
3-6
Cut Sheet Paper Feeding
When the Path Change Lever is at the "Cut Sheet Paper" position, the Pinch Roller
(1) is pressing against the Lower Feed Roller. Therefore, the paper pinched between
the rollers will be fed by the revolution of the two rollers.
Continuous Form Feed Paper Feeding
When the Path Change Lever is at the "Continuous Form Feed Paper" position, the
tractor clutch is linked. Therefore, the revolving power of the LF Motor is conveyed to
the Tractor, which is revolved, and the continuous form feed paper is fed. At this time,
the Pinch Roller (1) is off the Lower Feed Roller.
Tractor
Paper Select
Change
Tractor Gear
Paper Select
Change
Paper Select Lever Position
Tractor Clutch
Pinch Roller (1) and Lower Feed Roller
Paper Selection Sensor
Fig. 3-7: Path Change Lever Position
Functional Description
Lower Feed Roller (Gear)
Pinch Roller (1)
Lower Feed Roller
Pinch Roller (1) (shaft)
Cut Sheet
Paper
Release
Pressing
Closed
Continuous Form
Feed Paper
Link
Off
Open