Feeding From Paper Tray - Epson AcuLaser C2900N Service Manual

Hide thumbs Also See for AcuLaser C2900N:

Table of Contents

Chapter 6 Principles of Operation

2.3 Feeding from Paper Tray

When the paper tray is inserted into the feeder section, the projections on the CHASSIS FDR L

(PL3.1.8) and the CHASSIS FDR R (PL3.1.4) press the LATCH BOTTOM L (PL2.1.14) and the LATCH

BOTTOM R (PL2.1.15) inward until they are unlocked.

This allows the PLATE ASSY BOTTOM (PL2.1.2) to be lifted by the spring pressure of the SPRING N/

F L (PL2.1.3) and SPRING N/F R (PL2.1.4) to the position where it can feed sheets.

Upon the start of sheet feeding from the paper tray, the ROLL ASSY FEED (PL3.2.4) starts rotating

driven by the torque from the DRIVE ASSY MAIN (PL7.1.2) under control of the SOLENOID FEED MSI

(PL3.1.11) to feed the sheets to the REGI ROLL (ROLL REGI METAL: PL3.2.10/ROLL ASSY REGI:

LATCH BOTTOM R

Epson AcuLaser C2900N

ROLL ASSY FEED

Retard Roller

SPRING N/F R

PLATE ASSY BOTTOM

SPRING N/F L

LATCH BOTTOM L

Confidential

Show Quick Links

Table of Contents