Epson AcuLaser C2900N Service Manual page 336

Hide thumbs Also See for AcuLaser C2900N:

Table of Contents

Chapter 3 Removal and Replacement Procedures

RRP3.9 SENSOR PHOTO: SSI NO PAPER (PL3.2.13)

1) Remove the CASSETTE ASSY 250. (RRP2.1)

2) Open the COVER ASSY FRONT MG (PL1.2.1).

Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.

3) Remove the DRUM CARTRIDGE. (RRP4.6)

Note: The FUSING part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the FUSER UNIT. (RRP6.1)

5) Remove the COVER ASSY TOP. (RRP1.1)

6) Remove the COVER ASSY WINDOW TNR. (RRP1.6)

7) Remove the COVER SIDE R. (RRP1.5)

8) Remove the COVER SIDE L. (RRP1.7)

9) Remove the TRANSFER ASSY. (RRP6.3)

Note: When carrying out the work described next procedure, take care not to move the

BRACKET SNS from the printer too far because they are connected with the harness.

10) Remove the two screws (silver, tap,

8mm) that fix the BRACKET SNS

(PL3.2.28) to the printer, remove the

BRACKET SNS.

Confidential

Epson AcuLaser C2900N

Show Quick Links

Chapters

Table of Contents