Epson AcuLaser C2900N Service Manual page 370

Chapter 3 Removal and Replacement Procedures Revision B
3) Engage the two connectors (P/J411,
412) of the ROS ASSY.
4) Mate the three holes of the FRAME
ASSY LVPS with the bosses of the printer,
attach the FRAME ASSY LVPS to the
printer.
Note: Since two types of screws are used for securing the FRAME ASSY LVPS, ensure that the
right screws are used at their right securing positions.
The securing positions for tap screws are marked with [T].
The securing positions for metal screws are marked with [M].
5) Secure the DRIVE ASSY SUB to the
FRAME ASSY LVPS with the one screw
(silver, M4, 6mm).
3 - 116 Confidential
Epson AcuLaser C2900N