Epson AcuLaser C2900N Service Manual page 347

Chapter 3 Removal and Replacement Procedures Revision B
[Replacement]
1) Attach the SPRING ACT SSI to the
ACTUATOR SSI.
Note: When carrying out the work
described next procedure, ensure that SPRING ACT SSI
the SPRING ACT SSI is hung to
ACTUATOR SSI and the CHUTE UP
correctly.
2) Insert the right shaft of the ACTUATOR
SSI into the hole of the CHUTE UP, hang
the SPRING ACT SSI to the CUHTE UP.
3 - 93 Confidential
Epson AcuLaser C2900N