Paper Feeding Problems; Paper Jam Problems Inside The Product - Epson Expression Home XP-4105 User Manual

Paper Feeding Problems

If you have problems feeding paper, try these solutions:
• Place the product on a flat surface.
• If paper does not feed for printing, remove it. Then reload it in the middle of the rear paper feed. Slide
the edge guides against the edge of the paper, making sure that the paper stack is not above the
arrow mark on the edge guides.
• If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it.
• Do not load more than the recommended number of sheets.
• If paper jams when you print on both sides of the paper, try loading fewer sheets.
• Make sure your paper meets the specifications for your product.
• Make sure the paper size and paper type settings on the control panel are correct.
• Do not place objects on the feeder guard.
• For best results, follow these guidelines:
• Use new, smooth, high-quality paper that is not curled, creased, old, too thin, or too thick.
• Load paper in the rear paper feed printable side up.
• Follow any special loading instructions that came with the paper.
Parent topic:
Related references
Paper Loading Capacity
Paper Specifications

Paper Jam Problems Inside the Product

Paper Jam Problems in the Rear Cover
Paper Ejection Problems
Related tasks
Loading Paper in the Rear Paper Feed
Paper Jam Problems Inside the Product
If you see a message that paper has jammed inside the product, follow the steps here or on the LCD
screen to clear the jam.
1. Cancel the print job, if necessary.
Solving Paper Problems
208