Epson AcuLaser C2900N Service Manual page 383

Hide thumbs Also See for AcuLaser C2900N:

Table of Contents

Chapter 3 Removal and Replacement Procedures

RRP4.5 PWBA HVPS (PL4.1.19)

Note: Use the wrist strap to protect the PWB from the electrostatic.

1) Remove the CASSETTE ASSY 250. (RRP2.1)

2) Open the COVER ASSY FRONT MG (PL1.2.1).

Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.

3) Remove the DRUM CARTRIDGE. (RRP4.6)

Note: The FUSING part is very hot. Take added care not to get burned when performing the

service operation.

4) Remove the FUSER UNIT. (RRP6.1)

5) Remove the TONER CARTRIDGE (K), (C), (M), (Y). (RRP5.4)

6) Remove the COVER ASSY TOP. (RRP1.1)

7) Remove the COVER ASSY WINDOW TNR. (RRP1.6)

8) Remove the COVER SIDE R. (RRP1.5)

9) Remove the COVER SIDE L. (RRP1.7)

10) Remove the COVER REAR. (RRP1.3)

11) Remove the SWITCH ASSY INLET MG SFP, COVER INLET. (RRP8.8)

12) Remove the FAN. (RRP8.1)

13) Remove the PWBA ESS SFP. (RRP8.3)

14) Remove the PWBA MCU. (RRP8.9)

15) Remove the CLUTCH ASSY DRV and BEARING REGI. (RRP3.1)

16) Remove the TRANSFER ASSY. (RRP6.3)

17) Remove the UPPER UNIT. (RRP3.13)

18) Remove the HARN ASSY HVPS

(PL9.1.5) from the PWBA HVPS

Confidential

Epson AcuLaser C2900N

Show Quick Links

Chapters

Table of Contents