Epson AcuLaser C2900N Service Manual page 371

Chapter 3 Removal and Replacement Procedures Revision B
6) Secure the FRAME ASSY LVPS to the
printer with the two screws (silver, M4,
6mm) and the six screws (silver, tap,
8mm).
7) Mate the tab and boss of the GUIDE
HARNESS FSR with the holes of the
FRAME ASSY LVPS, move the GUIDE
HARNESS FSR to secure it.
Note: Ensure that the harnesses of the
HARN ASSY INTERLOCK and
HARNESS ASSY FUSER UNIT MG SFP
are kept apart so that they do not
contact each other.
8) Route the harness of the HARN ASSY
INTERLOCK along the GUIDE HARNESS
FSR.
3 - 117 Confidential
Epson AcuLaser C2900N