Epson AcuLaser C2900N Service Manual page 29

Chapter 1 Troubleshooting
Error Message
Status
Code
LCD
Ready to Print
446
Flip
IPv6 Duplicate
Change IPaddress
027
Ready to Print
452
Flip
IPv4 Duplicate
Change IPaddress
MCU NVRAM Error
Restart Printer
041 340
Flip
Error 041-340
Restart Printer
Fan Motor Error
Restart Printer
313
Flip
Error 042-313
Restart Printer
Motor Error
Restart Printer
325
Flip
Error 042-325
Restart Printer
Motor Error
Restart Printer
326
Flip
Error 042-326
Restart Printer
042
K Mode Sol Error
Restart Printer
372
Flip
Error 042-372
Restart Printer
K Mode Sol Error
Restart Printer
373
Flip
Error 042-373
Restart Printer
Over Heat
Please Wait...
700
Flip
Error 042-700
Please Wait...
Laser Error
Restart Printer
061 370
Flip
Error 061-370
Restart Printer
Epson AcuLaser C2900N
<IPv6 duplicate>
Duplicate IPv6 addresses detected upon startup.
<IPv4 duplicate>
Duplicate IPv4 addresses detected upon startup.
<IOT NVRAM Error>
The operation error of NVM (read/write check error etc.) is
detected.
<IOT Fan Motor Failure>
MCU detects an error upon receiving error signal from the
Fan.
<IOT Main Motor Failure>
Main Motor failure is detected.
<IOT Sub Motor Failure>
Sub Motor failure is detected.
<IOT K Mode Solenoid Error 1>
The error is generated when K Mode Solenoid (Color Mode
Switching Solenoid) does not operate in specified time.
<IOT K Mode Solenoid Error 2>
The error is generated when the gear which operates by K
Mode Solenoid (Color Mode Switching Solenoid) rotates two
times.
<IOT Over Heat Stop>
The temp. Sensor sensed high temperature.
<IOT ROS Failure>
The operation error of ROS (rotational error etc.) is detected.
1 - 16
Status Contents
Revision B
FIP to be
referred
FIP-1.22
FIP-1.22
FIP-1.23
FIP-1.24
FIP-1.25
FIP-1.26
FIP-1.27
FIP-1.27
FIP-1.28
FIP-1.29
Confidential