Epson AcuLaser C2900N Service Manual page 235

Chapter 2 Operation of Diagnostic
Motor/Clutch/Solenoid Name
(Diag. Code)
Duplex Clutch
(DO-35)
Epson AcuLaser C2900N
NOTE: This procedure is for the technical staff.
Combination test is as follows.
The duplex gear rotates when DO-d and DO-35 are executed.
1) Power on the printer, and enter the Diag Mode.
2) Open the Front Cover.
3) Cheat the Safety Interlock System.
4) Execute DO-d and DO-35.
5) Check that the Gear rotates.
6) Press the "STOP" key to stop the clutch.
7) Press the " " key to display DO-d.
8) Press the "STOP" key to stop the motor.
9) Remove the cheater.
10) Close the Front Cover.
2 - 31
Check procedure
Revision B
Rio02058GA
Confidential