Epson AcuLaser C2900N Service Manual page 231

Chapter 2 Operation of Diagnostic
Motor/Clutch/Solenoid Name
(Diag. Code)
Tray2 Feeder Motor
(DO-17/18/19/1a)
Fan Motor
(DO-1e/1f)
Epson AcuLaser C2900N
NOTE: This procedure is for the technical staff.
1) Remove the Tray 2.
2) Remove the COVER REAR OPT and COVER SIDE L OPT.
3) Power on the printer, and enter the Diag Mode.
4) Execute DO-17.
5) Check that the Tray 2 Feed Motor rotates.
CASSETTE2 Feed Motor
6) Press the "STOP" key to stop the clutch.
7) Replace the COVER REAR OPT and COVER SIDE L OPT.
8) Replace the Tray 2.
1) Power on the printer, and enter the Diag Mode.
2) Execute DO-1e.
3) Check that the Fan rotates.
4) Press the "STOP" key to stop the clutch.
2 - 27
Check procedure
Rio02055GA
Revision B
MiS02016SA
Confidential