Chapter 3 Removal and Replacement Procedures
Revision B
RRP6. TRANSFER & FUSER UNIT
RRP6.1 FUSER UNIT (PL6.1.1)
[Removal]
1) Open the COVER ASSY FRONT MG (PL1.2.1).
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
2) Open the TRANSFER ASSY (PL6.1.7).
3) Pull the LEVER to release the lock.
4) Disengage the connector of the FUSER
3)
UNIT by pulling the right side of the
FUSER UNIT toward you with the LEVER
released.
4)
3 - 153
Confidential
Epson AcuLaser C2900N