Interconnection Wiring Diagram Of Parts; Notes On Using The Wiring Diagram Between Parts - Epson AcuLaser C2900N Service Manual

Chapter 7 Wiring Diagrams and Signal Information

2. Interconnection Wiring Diagram of Parts

2.1 Notes on Using the Wiring Diagram between Parts

The following describes the legend of the wiring diagrams between parts shown on the following pages.
Symbols
P/J
PWBA
HNB DRV
Heater
REGI CLUTCH
EXIT PAPER
Epson AcuLaser C2900N
Denotes a plug.
Denotes a jack.
XX
Denotes Pin yy and Jack yy of the connector Pxx and Jxx.
YY
Denotes the parts.
PL X.Y.Z implies the item "Z" of plate (PL) "X.Y" in Chapter 5.
Parts List.
Denotes functional parts attached with functional parts name.
Control
Denotes the control and its outline in PWB.
DEVE_A Denotes a connection between parts with harnesses or wires,
attached with signal name/contents.
Denotes the function, and logic value of the signal to operate the
function (Low: L, High: H).
The given voltage is for signal in high status.
The arrow indicates the direction of signal.
Denotes the function, and logic value of the signal when the func-
tion operated (Low: L, High: H).
The given voltage is for signal in high status.
The arrow indicates the direction of signal.
Description
7 - 3
Revision B
Confidential