Epson AcuLaser C2900N Service Manual page 397

Chapter 3 Removal and Replacement Procedures Revision B
9) Mate the tab and boss of the GUIDE
HARNESS FSR with the holes of the
FRAME ASSY LVPS, move the GUIDE
HARNESS FSR to secure it.
Note: Ensure that the harnesses of the
HARN ASSY INTERLOCK and
HARNESS ASSY FUSER UNIT MG SFP
are kept apart so that they do not
contact each other.
10) Route the harness of the HARN ASSY
INTERLOCK along the GUIDE HARNESS
FSR.
11) Mate the two holes of the BRACKET
MCU R with the bosses of the printer,
secure it with the two screws (silver, 6mm).
3 - 143 Confidential
Epson AcuLaser C2900N