Epson AcuLaser C2900N Service Manual page 401

Chapter 3 Removal and Replacement Procedures Revision B
RRP5.3 HOLDER ASSY TCRU (K), (C), (M), (Y) (PL5.1.17~20)
[Removal]
1) Remove the CASSETTE ASSY 250. (RRP2.1)
2) Open the COVER ASSY FRONT MG (PL1.2.1).
Note: Cover the drum of the DRUM CARTRIDGE to avoid exposure to light.
3) Remove the DRUM CARTRIDGE. (RRP4.6)
Note: The FUSING part is very hot. Take added care not to get burned when performing the
service operation.
4) Remove the FUSER UNIT. (RRP6.1)
5) Remove the COVER ASSY TOP. (RRP1.1)
6) Remove the COVER ASSY WINDOW TNR. (RRP1.6)
7) Remove the COVER SIDE R. (RRP1.5)
8) Remove the COVER SIDE L. (RRP1.7)
9) Remove the COVER REAR. (RRP1.3)
Note: Described below is the removal procedure common among the four HOLDER ASSY
TCRU.
10) Press the central part of the HOLDER
ASSY TCRU to release the hole of the
HOLDER ASSY TCRU from the boss of
the FRAME DISP (PL5.1.12). Open the
HOLDER ASSY TCRU by 90 degrees.
3 - 147 Confidential
Epson AcuLaser C2900N