Chapter 3 Removal and Replacement Procedures
Revision B
[Replacement]
1) Mate the hole of the switch with the boss
of the printer, secure the switch with the
one screw (silver, tap, 16mm).
2) Secure the harness of the HARN ASSY
INTERLOCK with the clamps.
Note: Ensure that the harnesses of the
HARN ASSY INTERLOCK and
HARNESS ASSY FUSER UNIT MG SFP
are kept apart so that they do not
contact each other.
3) Route the harness of the HARN ASSY
INTERLOCK along the GUIDE HARNESS
FSR, engage the connector (P/J44) of the
HARN ASSY INTERLOCK to the PWBA
LVPS.
3 - 206
Confidential
Epson AcuLaser C2900N