Ir Transmission Delay; Ur2 Duplex Mode; Use Ir Pins; Onboard Parallel Port - Albatron KX18D PRO User Manual

RxD, TxD Active
This item determines the RxD and TxD frequencies. This field only configurable if "UART Mode
Select" is set to "ASKIR" or "IrDA". Options: Hi / Lo (default)、Hi / Hi、Lo / Hi、Lo / Lo

IR Transmission Delay

This item allows you to enable/disable IR transmission delay. This field only configurable if "UART
Mode Select" is set to "ASKIR" or "IrDA". Options: Enabled (default)、Disabled

UR2 Duplex Mode

Select the transmission mode used by the IR interface. Full-duplex mode permits simultaneous
bi-directional transmission. Half-duplex mode permits transmission in only one direction at a time.
This field only configurable if "UART Mode Select" is set to "ASKIR" or "IrDA".
Options: Half (default)、Full

Use IR Pins

Consult your IR peripheral documentation to select the correct setting of the TxD and RxD signals.
This field is only configurable if "UART Mode Select" is set to "ASKIR" or "IrDA".
Options: Full、Half (default)

Onboard Parallel Port

Select an address and corresponding interrupt for the onboard parallel port.
Options: 378/IRQ7 (default)、278/IRQ5、3BC/IRQ7、Disabled

Parallel Port Mode

This option allows you to select a parallel port mode for the onboard parallel port.
Options: ECP(default)
EPP
SPP
ECP+EPP
Normal

EPP Mode Select

Select EPP port type 1.7 or 1.9. This field is only configurable if "Parallel Port Mode" is set to "EPP"
or "ECP+EPP". Options: EPP 1.9(default)、EPP 1.7
Extended Capabilities Port.
Enhanced Parallel Port.
Standard Printer Port.
ECP & EPP mode.
37
KX18D Series