Table of Contents
Advertisement
KX18D Series
the CPU FSB Frequency will be set to safe values that you can manually adjust in the item. When the
"System Performance" set to "Expert" the options range will be 100 ~ 300 MHz.
CPU Interface
When the "System Performance" set to "Expert", this item allows you to set the CPU/FSB
parameters.
Options: Optimal
Use most stable CPU/FSB parameters
Aggressive Use overclocked CPU/FSB parameters
DDR:CPU Ratio
When the "System Performance" set to "Expert", this item allows you to adjust your "DDR:CPU
Ratio" and overclock the DDR speeds of the system.
Options: 1、1.2、1.33、1.50、1.60、1.66、2、2.4、2.5、2.66、3、3.33、4、Auto or AUTO,
BySPD (default)
DDR Speed (Strobe/Sec)
This item shows the DDR Speed.
Memory Timings
When the "System Performance" set to "Expert", this item allows you to select the memory timing.
This item determines DRAM clock/ timing using SPD or manual configuration. Make sure your
memory module has SPD (Serial Presence Data), if you want to select the "Optimal".
Options: Optimal (default)、Aggressive、Turbo、Expert
T (RAS)
When the "Memory Timings" set to "Expert" then the item allows you to select DRAM active to
Precharges Delay. Row-active delay => set system performance to "Optimal" to use the delay
recommend by the DIMM's manufacturer. Options: 1~15
T (RCD)
When the "Memory Timings" set to "Expert" then the item allows you to select the DRAM delay
time when begin read. RAS-to-CAS delay => set system performance to "Optimal" to use the delay
recommend by the DIMM's manufacturer.Options: 1~7
T (RP)
When the "Memory Timings" set to "Expert" then the item allows you to set the time to precharge.
Row-precharge delay => set system performance to "Optimal" to use the delay recommend by the
DIMM's manufacturer. Options: 1~7
30
Hide quick links:
Advertisement
Table of Contents
