Ir Transmission Delay; Ur2 Duplex Mode; Onboard Parallel Port; Parallel Port Mode - Albatron KX400+ Pro-C User Manual

RxD, TxD Active
This item determines the RxD and TxD frequencies. Options: Hi / Lo (default)、Hi /
Hi、Lo / Hi、Lo / Lo.

IR Transmission Delay

This item allows you to enable/disable IR transmission delay. Options: Enabled
(default)、Disabled.

UR2 Duplex Mode

Select the value required by the IR device connected to the IR port. Full-duplex
mode permits simultaneous bi-directional transmission. Half-duplex mode permits
transmission in only one direction at a time. Options: Half (default)、Full

Onboard Parallel Port

This item allows you to determine the parallel port interrupt and address.
Options: 378/IRQ7 (default)、278/IRQ5、3BC/IRQ7、Disabled

Parallel Port Mode

This option allows you to select an operating mode for the on board parallel print
port.
Options: ECP(default). ECP means that using Parallel port as Extended Capabilities
Port.
EPP Using Parallel Port as Enhanced Parallel Port.
SPP Using Parallel port as Standard Printer Port.
ECP+EPP Using Parallel port as ECP & EPP mode.

EPP Mode Select

Select EPP port type 1.7 or 1.9. Options: EPP 1.7(default), EPP1.9.

ECP Mode Use DMA

Select a DMA Channel for the port. Options: 3 (default)、1
Game Port Address
Game Port I/O Address. Options: 201 (default)、209、Disabled
Midi Port Address
Midi Port Base I/O Address. Options: 330 (default)、300、290、Disabled
Midi Port IRQ
This determines the IRQ that Midi Port will use. Options: 5 (default)、10
KX400+ series mainboard
53