Voice Genie / BIOS Mirror Function and SATA function
switch: SW1 (only for KX18D PRO II)
This switch is used to configure the Voice Genie and BIOS Mirror functions. With SW1-1 and
SW1-2, you can select the appropriate language for audio diagnostics. With the SW1-3 switch, you
can begin using the alternate or mirror BIOS by switching this switch to "rescue". This is used when
the primary BIOS had been infected with a virus or damaged during a flash update. With SW1-4, you
can enable or disable the Serial ATA devices. If the system has been installed the "Silicon RAID
Driver" and the "SATA Function" have to set to enable permanently.
SW1
Voice Genie
Voice Genie
English
Chinese
Japanese
German
BIOS Mirror
BIOS Mirror
Enable(default)
Disable (rescue)
SATA Function
SATA Function
Enable(default)
Disable
SW1-1
SW1-2
ON
ON
ON
OFF
OFF
ON
OFF
OFF
SW1-3
ON (Main BIOS=>U19)
OFF (Backup BIOS=>U24)
SW1-4
ON
OFF
19
KX18D Series