Ram Module Installation - Albatron KX18D PRO User Manual

Enabling Dual-Channel DDR
To enable Dual-Channel DDR functionality, your system must meet certain configuration conditions.
First, you can only use two of the three DIMM slots. You can use DIMM1 and DIMM3 together, or
you can use DIMM2 and DIMM3 together. Second, the DIMM modules that you use must be
identical (capacity, manufacturer and model). See the table below for clarification of DIMM module
options.
Refer to the list below to install the DDR SDRAM memory modules to enable dual-channels facility:
(the
DIMM1

RAM Module Installation:

1. Pull the white plastic tabs on each side of the slot away from the slot.
2. Match the notch on the button of the RAM module with the corresponding pattern in the DIMM
slot. This ensures that the module is inserted properly.
3. Lower the RAM module into the DIMM Slot and press firmly using both thumbs until the module
snaps into place.
4. Repeat steps 1 & 2 for the remaining RAM modules.
＊The pictures above are for reference only.
means that a DIMM module is present)
DIMM2
-
-
10
KX18D Series
DIMM3