Central Office Calls, Placing - NEC DS1000 Product Description

Section 3: Features
Central Office Calls, Placing
42 N Section 3: Features
User Programmable Feature: # R A L
Assigns line key ringing mode.
Customize the call placing
options to meet the site
requirements and each
individual's needs.
G Pressing a Line Key
Any keyset can have line keys for one-touch access to specific trunks. See Line Keys on
page 74 for more.
G Pressing a Loop Key
Loop Keys provide a user with one-touch access to the assigned Loop Group. Loop Groups
can consist of one or more Trunk Groups. See Loop Keys on page 75 for more.
G Using Line Dial-Up
With Line Dial-Up, a user can select a specific trunk by pressing ICM and dialing the Line
Dial-Up code (#9) followed by the trunk number (1-16).
G Using Direct Trunk Access
Direct Trunk Access allows a user to access a trunk by pressing ICM and dialing the trunk's
extension number (e.g., 101 for trunk 1, 102 for trunk 2. etc.). See Direct Trunk Access on
page 55 for more.
G Dialing a Trunk Group Access Code
User's can also place trunk calls by pressing ICM and dialing a Trunk Group Access Code (90-
98). See Trunk Groups on page 117 for more.
G Trunk Group Routing
If the system has Trunk Group Routing enabled, users get the first available trunk when the
press ICM and dial 9 . See Trunk Group Routing on page 115 for more.
Feature Quick Steps
To place a call over a specific trunk using a line key:
1. Lift handset + Press line key + Dial outside number.
To place a call over a specific trunk (using Line Dial-up or Direct Trunk Access):
1. Lift handset + Press ICM .
2. For Line dial-up: Dial #9 followed by the trunk number (e.g., #901 for trunk 1).
OR
For Direct Trunk Access: Dial 4 plus the trunk number (e.g., 101 for trunk 1).
3. Dial outside number.
To place a call over a trunk group:
1. Lift handset + Press ICM .
2. Dial trunk group code (90-98) + Dial outside number.
User Programmable Feature: # R A L
Assigns line key ringing mode.
Availability: All versions.
The system provides flexibility in the way each extension user
can place outgoing trunk calls. A user can place a call by:
DS1000/2000 Product Description