System Timers, Stations - NEC DS1000 Product Description

System Timers, Stations

DS1000/2000 Product Description
Option
Force Program Exit
Adjustable station timers
allow the system to more
precisely meet the site
requirements.
Option
Hold Recall
Exclusive Hold Recall
Camp-On
Call Forward Ring No
Answer
Call Waiting Tone Interval
Call Coverage Delay
Hook Flash Transfer
Hook Flash Disconnect
Number of Extended
Rings
Section 3: Features
Description
If a telephone in the programming mode is inactive longer than
this interval, the system automatically cancels the programming
mode and makes the telephone idle.
Availability: All versions.
The system provides many station timers that the administrator
can customize. Review the tables below for a description of each
station timer.
Table 5: Station Timers
Description
Use this timer to set how long a call stays on Hold before it
recalls the extension that initially placed it on Hold.
Use this timer to set how long a call stays on Exclusive Hold before
it recalls the extension that initially placed it on Exclusive Hold.
Not used.
When Call Forwarding Ring No Answer is enabled, this timer
sets how long a forwarded call rings an unanswered extension
before routing to the forwarding destination.
In addition, use this timer to set how long a transferred call rings
a busy non-operator extension before recalling the extension
from which it was initially transferred.
This timer also sets how long a call will ring an idle UCD Hunting
group member before cycling to the next member of the group.
Use this timer to set the interval between Call Waiting tones.
Also use this timer to set the interval between Off-Hook Signal-
ing alert tones.
For extensions with Delayed Ringing Call Coverage keys, this
timer sets how long a call flashes the key at an extension before
it starts to ring.
Not used.
Not used.
If an extension's Class of Service enables Extended Ringing, use
the timer to set the duration of the Extended Ringing.
Section 3: Features N 105
3