Flexible Numbering Plan; Forced Trunk Disconnect - NEC DS1000 Product Description

Section 3: Features

Flexible Numbering Plan

Forced Trunk Disconnect

64 N Section 3: Features
Change the digits users dial
for co-workers and other
features.
For this feature:
Attendant Position
Intercom
Direct Trunk Access
Central Office Calls, Placing
Disconnect a co-worker's
outside call in an
emergency.
Forced Trunk Disconnect to release a trunk on which there is no conversation. This can happen if a
trunk does not properly disconnect when the outside party hangs up.
Forced Trunk Disconnect abruptly terminates the active call on the trunk. Only use this
feature in an emergency and when no other trunks are available.
Feature Quick Steps
1. Access busy trunk + Dial # to disconnect the line.
Availability: All versions
The system's Flexible Numbering Plan allows you to change the
digits users dial to reach the attendant, other co-workers and
trunks. The following chart shows the areas of the system num-
ber plan you can change.
You can change the digits a
user dials to:
Reach the system operator(s)
Call a co-worker over the Intercom
Directly access a trunk
Access a Trunk Group
Availability: All versions
Forced Trunk Disconnect allows an extension user to disconnect
(release) another extension's active trunk call. Forced Trunk Dis-
connect lets a user access a busy trunk in an emergency, when no
other trunks are available. Maintenance technicians can also use
!! CAUTION !!
DS1000/2000 Product Description
These digits are
normally:
0 or 01-04
300-333 in
DS1000, 300-427
in DS2000
101-106 in
DS1000. 101-164
in DS2000
90-98