Four-Port 10/100 Base-Tx Ethernet Pci Adapter (F/C 4951) - IBM RS/6000 SP Handbook

Supports Ethernet LAN Emulation and Token Ring
Supports ATM SNMP
Customer supplied components
You must supply the following components with this feature:
Plenum rated 62.5/125 multimode fiber cables terminated with an SC
connector
An ATM switch

8.2.25 Four-Port 10/100 BASE-TX Ethernet PCI adapter (F/C 4951)

The IBM Four-Port 10/100 BASE-TX Ethernet PCI adapter (F/C 4951) makes
available four Ethernet ports using a single PCI slot. It is a 32/64-bit, long PCI
adapter, supporting four industry-standard Ethernet 10BASE-T or 100BASE-TX
interfaces supporting 10 or 100 Mbps data rates, either half or full duplex on each
of four separate ports. Each port has an RJ-45 connector for attachment to
standard CAT-3/5 unshielded, twisted-pair cable. The adapter is IEEE 802.3u
compatible and has full auto-negotiation for detecting speed and duplex
capability across each port. It provides network boot and Network Install
Manager (NIM) capability.
Feature characteristics
This feature has the following characteristics and requirements:
Supports UTP-5 (RJ45) cable connections
Capable of communicating at 10 or 100 Mbps
Has auto-negotiation to determine speed and duplex capability
Supports 32/64 bit PCI data width
Supports both full and half duplex operation
Includes status LEDs for speed and data activity
Supports NIM install
Meets PCI 2.1 specifications
Operates at PCI bus speed of 33 MHz
Fits in full-size PCI slots
Featured components
This feature order provides the following:
Adapter card
Chapter 8. PCI communication adapters
247