Software Requirements; Ethernet Adapters For Pci/Mca Control Workstations - IBM RS/6000 SP Handbook

F/C Description
2955 16-port asynchronous adapter
(not compatible with SP-attached servers and CES)
2996 multiport interface cable
128-port MCA
8128 128-port asynchronous controller
8130 remote asynchronous node 16-port EIA-232
8134 World trade version of F/C 8130
Ethernet adapters
For additional PCI/MCA Ethernet ports, select the equipment you need from the
feature codes shown in Table 7-3.
Table 7-3 Ethernet adapters for PCI/MCA control workstations
F/C Description
PCI
2968 IBM 10/100 Mbps Ethernet PCI adapter
2985 PCI Ethernet BNC/RJ-45 adapter
2987 PCI Ethernet AUI/RJ-45 adapter
4224 Ethernet 10BASE2 transceiver
MCA
2980 Ethernet high performance LAN adapter
2992 Ethernet twisted pair (TP) adapter
2993 Ethernet BNC/AUI adapter
4224 Ethernet 10BASE2 transceiver

7.2.4 Software requirements

The control workstation and some of its software might not be part of the SP
package and must be ordered separately.
The control workstation requires the following software:
AIX 4.3.3 (5765-C34) (or later).
Currently
Available
No
No
No
No
No
Currently Available
Yes
Yes
Yes
Yes
No
No
No
Yes
Chapter 7. Control workstations
203