Advanced Serialraid Plus Pci Adapter (F/C 6230) - IBM RS/6000 SP Handbook

single speed supported is 1.0625 Gbps (wire-speed) which corresponds to
approximately 100 MBps. The supported media includes 50 and 62.5 micron
multimode fiber. The supported transmitter is short-wave laser with open fiber
control.
Feature characteristics
This feature has the following characteristics:
Single Fibre Channel loop per adapter
Single initiatior support (one adapter for PCI bus per loop)
Optical fiber link cabling supporting a distance of up to 500 m (1640 ft.)
Fiber optic interface data rates of up to 100 MBps
PCI 2.1 compatible, universal 3.3/5 volt adapter
Feature components
This feature order provides the following:
Adapter card
CD-ROM with adapter device driver
Installation instructions
Customer supplied components
You must supply the following components for this feature:
Cables:
Multimode 50/125 micron fiber with SC connectors:
– 1062.5 MBps
– Two 500 m cables
Multimode 62.5/125 micron fiber with SC connectors:
– 1062.5 MBps
– Two 175 m cables

8.2.38 Advanced SerialRAID Plus PCI adapter (F/C 6230)

The Advanced SerialRAID Plus adapter (F/C 6230) is a functional enhancement
to the withdrawn Advanced SerialRAID Adapter (F/C 6225)and supports
2-initiator FWC and 2-way RAID 10. The Advanced SerialRAID Adapter (F/C
6225), which has been withdrawn from marketing, has a data transfer rate of up
to 160 MBps per loop. This high-performance multi-initiator Serial Storage
Architecture (SSA) adapter provides eight-initiator non-RAID capability,
two-initiator RAID-5 capability, and one-initiator RAID-0 capability.
256 RS/6000 SP and Clustered IBM ^ pSeries Systems Handbook