Memory Requirements And Options - IBM RS/6000 SP Handbook

2.4.5 Memory requirements and options

375 MHz POWER3 SMP Wide Nodes require two memory cards and a minimum
of 256 MB of memory. These nodes support a maximum of 16 GB of memory;
each card has an 8 GB capacity. Memory is supplied by 128, 256, and 512 MB
DIMMs which must be mounted in pairs. Different capacity DIMM-pairs can be
mixed on the memory cards. Note that with the minimum memory (256 MB)
installed, the second memory card contains no DIMMs. Table 2-6 shows the
memory features for the 375 MHz POWER3 SMP Wide Nodes.
Table 2-6 375 MHz POWER3 SMP Wide Nodes memory features
Feature Code
4098 Base Memory Card
4110 256 MB – (2 x 128 MB DIMMs)
4133 1 GB – (8 x 128 MB DIMMs)
4402 2 GB – (16 x 128 MB DIMMs)
4403 3 GB – (24 x 128 MB DIMMs)
4404 4 GB – (32 x 128 MB DIMMs)
4119 512 MB – (2 x 256 MB DIMMs)
4134 2 GB – (8 x 256 MB DIMMs)
4412 4 GB – (16 x 256 MB DIMMs)
4413 6 GB – (24 x 256 MB DIMMs)
4414 8 GB – (32 x 256 MB DIMMs)
4100 1 GB – (2 x 512 MB DIMMs)
4421 4 GB – (8 x 512 MB DIMMs)
4422 8 GB – (16 x 512 MB DIMMs)
4423 12 GB – (24 x 512 MB DIMMs)
4424 16 GB – (32 x 512 MB DIMMs)
Description
Minimum Maximum
Node Features Per
Requirement Node
2
1
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Chapter 2. SP internal processor nodes
2
16
4
2
1
1
16
4
2
1
1
16
4
2
1
1
45