IBM RS/6000 SP Handbook page 396

F/C
6311
Notes:
1. The maximum quantity of adapters supported for a specific POWER3 SMP
High Node and six (6) SP Expansion I/O Units connected to that node.
2. The maximum quantity of adapters supported for a specific 375 MHz
POWER3 SMP High Node and six (6) SP Expansion I/O Units connected
to that node.
PCI adapter plugging rules and restrictions
This section lists specific PCI adapter installation rules and restrictions by node
type.
375 MHz POWER3 SMP Wide Node:
If one F/C 2969 is installed, no more than four (in any combination) of F/C
2741, 2742, 2743, 2963, 2968, 2988 can be installed.
If two F/C 2969 are installed, no more than two (in any combination) of F/C
2741, 2742, 2743, 2963, 2968, 2988 can be installed.
If three F/C 2969 are installed, none of F/C 2741, 2742, 2743, 2963, 2968,
2988 can be installed.
If one F/C 2969 is installed, place it in slot I1 through I8 (I/O side).
If two F/C 2969 are installed, place one in slot I1 through I4 (I/O side) and the
other in slot I5 through I8.
F/C 2751 must be placed in either slot I3 (CPU side) or in slot I4.
F/C 2963 and 2988 cannot be placed in slot I5.
F/C 2732, 2733, 2969, 6205, 6225, 6227, 6228, 6230 cannot occupy the
same PCI bus.
The combined quantity of F/C 6225 and 6230 cannot exceed two per PCI
bus.
F/C 6205 cannot be placed in slot I5 to I8.
372 RS/6000 SP and Clustered IBM ^ pSeries Systems Handbook
PCI Adapter Name Max.
Quantity
per High
node
ARTIC960RxF Digital 3
Trunk Resource
Max. Combi Combi
Quantity n- n-
per SP ation ation
Expansi (Note (Note
on I/O 1) 2)
Unit
0 3 3