Rs/6000 Sp System With Sp-Attached Servers Sample Configuration - IBM RS/6000 SP Handbook

SP System M/T 9076
Tall Frame
SP Node
SP Switch
Figure 1-2 RS/6000 SP system with SP-attached servers sample configuration
Figure 1-2 shows an RS/6000 SP system with SP-attached servers sample
configuration:
The SP node and the SP Switch are mounted in a tall frame.
The SP-attached servers (M/T 7017 and M/T 7026) are housed in their own
frames.
The SP node and the SP-attached servers are connected to the SP Switch.
The SP node and the SP-attached servers are connected to the SP Ethernet
interface of the CWS.
The frame with the SP node and the SP Switch, and the SP-attached servers
are connected to the RS-232 interface of the CWS.
SP-Attached Servers
MIT 7017 MIT 7026
CWS
SP Ethernet Connection
SP Switch Connection
RS232C Connection
11
Chapter 1. Introduction