Artic960Rxf Digital Trunk Resource Adapter (F/C 6311) - IBM RS/6000 SP Handbook

– F/C 2876: ARTIC960RxD Quad DTA, E1, 75 ohm
unbalanced-ungrounded, 1.8 m 4-port cable
– F/C 2877: ARTIC960RxD Quad DTA, H.100, 4-drop cable

8.2.40 ARTIC960RxF Digital Trunk Resource adapter (F/C 6311)

The Artic960RxF Digital Trunk Resource adapter provides H.100/SCBus support
for TDM-based functions such as conferences, DSP speech recognition and
text-to-speech plus one-call FAX. It is intended for use with the Corepoint
DT/6000 Voice Recognition product. It has no external connections.
Feature characteristics
This feature has the following characteristics:
Must be used in conjunction with DTXA.
Intel 80960 RD processor with 4 MB DRAM.
Universal PCI adapter.
Replaces Dialogic Antaries ISA adapter.
32-bit PCI interface.
A PLX 9080 local bus provides access to the SC4000s and DSPs from the
i960.
Two TI C67x floating point DSPs; each with 512 KB external SBSRAM, 4MB
of external SDRAM, operating at a clock cycle of 167 MHz.
Two SC4000 chips provide H.100/SCBus support for TDM-based functions
such as conferencing, DSP speech recognition, and text-to-speech plus
one-call FAX.
A PMC connector to allow attachment of an optional daughter card.
Feature components
This feature order provides the following:
One ARTIC960RxF adapter (F/C 6311)
ARTIC RTE CD kit
Diagnostics disk
A connecting cable (required); the following cables are available from IBM:
– (F/C 2877): ARTIC960RxD Quad DTA, H.100, 4-drop cable
– (F/C 4353): ARTIC960RxD Quad DTA, H.100, 8-drop cable
Chapter 8. PCI communication adapters
259