Telemetry:ext-Volt - FUTABA 6k Instruction Manual

EXT-VOLT
When connected as shown in the figure, the voltage of the drive battery in the aircraft and another
power supply battery can be displayed at the T6K.
● R3008SB Receiver, CA-RVIN-700 (external voltage input cable sold separately) is necessary.
● Soldered wiring work is necessary.
Extra Voltage
Port
Black line
Red line
with external power
input must be less than 70V
● EXT-Voltage display
When connected as shown in the figure, the drive battery voltage is displayed at the transmitter.
Method
Calling the SENSOR screen
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
（1 second）
EXT start
① In the SENSOR screen state, select
"EXT ▶ OFF " from the menu with
the Jog key.
(Sold separately)
R3008SB
CA-RVIN-700
Power Battery or
another power supply
for servos
② Select
from the menu with the Jog
key.
② S e l e c t t h e " R3008S B " b y
pressing the + key or – key.
＋
Fuse
Branch
"SENSOR"
－
or
To Motor Controller
or Servo
③ Open the setting screen by
pressing the Jog key.
SENSOR Screen
R3008SB
77