Flap→Elevator Mixing - FUTABA 6k Instruction Manual

Flap → Elevator mixing
FLP → EL
Function
This mixing is used to compensate for pitch
changes (elevator direction) at flap operation.
●When the mixing direction is reversed by the
linkage adjustment is possible by changing the
rate polarity.
●The mixing reference point can be shifted.
(OFFSET)
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Activating the function
Mixing rate
Mixing offset rate
● Select the setting item
with the Jog key.
Flap → Elevator Mixing
■ Activating the function
① Select the "MIX" item and then select
the "ON" by pressing the + key or –
key.
＋
or
● When you do not use a function, set
to the "INH" side.
（When changing the mixing reference point）
■ Mixing reference point offset setting
① Select the "OFFSET" item and turn the Flap knob to the
point you want to make the mixing reference point and
set the reference point by pressing the Jog key for 1
second.
Range：-100 ～ +100% Default：0%
WING TYPE
② Select
from the menu with the
Jog key.
■ Mixing rate
② S e l e c t t h e " R AT E " i t em a n d
－
1AIL 1AIL1FLP
"FLP → EL"
then adjust the mixing rate by
pressing the + key or – key.
Range：-100 ～ +100%
Default：0%
● When you want to return the set value to the initial
value, press the + key and – key simultaneously.
（1 second）
(AIRPLANE)
2AIL 2AIL1FLP ELEVON
CH5
Flap 5
CH2
Elevator
③ Open the setting screen by
pressing the Jog key.
● When not using this function,
select INH.
（P r e s e n t f l a p o p e r a t i n g
position）
＋ －
or
111