FUTABA 6k Instruction Manual page 20

When Using The Optional Battery HT5F1800B
When using an optional rechargeable battery, replace the battery as described below.
-Always use the optional HT5F1800B rechargeable battery.
-The type of power source used must be set by system setting.
-When the transmitter will not be used for a long time, remove the battery.
D i s c o n n e c t t h e
connector
R e f e r t o t h e p r e v i o u s
description and remove the
transmitter battery cover.
A f t e r r e m o v i n g t h e d r y
cell battery box from the
transmitter, disconnect the
connector.
When Charging the Optional Battery HT5F1800B
Charging jack
20
Dry cell
battery BOX
Insert the connector of the
new battery and load the new
battery into the transmitter.
Connect the battery
connector.
Charging a NiMH Battery
(Example: When using the HT5F1800B with the special charger)
1
Plug the transmitter cord of the special charger into
the charging jack on the rear of the transmitter.
2
Plug the charger into an AC outlet.
3
Check that the charging LED lights.
NiMH battery HT5F1800B
(not included)
Finish by installing the
battery cover.
CAUTION
When closing the battery
cover, be careful that the
battery cover does not pinch
the battery lead wires.
Shorting of the battery lead wires may
lead to fire and abnormal heating and
cause burns or fire disaster.