Tx Setting; Stick-Mode; Stick-Adjustment - FUTABA 6k Instruction Manual

The settings here are special settings that are unnecessary during normal use. The stick mode can be
changed and stick adjustment (calibration), throttle lever reverse, and language can be set.

TX SETTING

STK-MODE
STK-ADJ
THR-REV
LANGUAGE
■ STK-MODE
RUD AIL RUD
ELE THR
MODE 1
RUD
AIL AIL
ELE THR
MODE 3
■ STK-ADJ
This function is normally not used. If stick deviation should occur, make this adjustment.
Do not use it in the normal state.
Calling the setting screen
① Turn off the power and then
turn the power back on while
pressing the + key and – key
simultaneously.
＋ －
Stick adjustment
① Select the stick you want to
adjust with 1 〜 4 with the +
key.
＋
4
TX SETTING
1
NEXT
NOR
English
AIL
THR ELE
MODE 2
RUD
THR ELE
MODE 4
② Select STK-ADJ → NEXT
in the menu with the Jog
key.
② Press the Jog key down
and select NEUT ■ .
1
3 2
Turn on the power switch with the + key
and – key pressed in the power off state. The
screen shown at the left appears. To return
to the home screen, turn off the power
and then turn the power back on without
pressing the keys.
This is the MODE1 〜 MODE4 setting. The
initial state is MODE2. To change the mode
the stick ratchet must be changed. Request
that this be done by Futaba Service. (Charged
modification)
③ Enter the setting screen by
③ Set the stick to the neutral
pressing the Jog key.
position and press the Jog
key.
159