Aileron→Camber Mixing - FUTABA 6k Instruction Manual

Aileron → Camber mixing
AL → CMB
Function
This mixing links the camber flaps with aileron
operation (stick). It is used when you want to
increase roll axis maneuverability.
OFF
ON
Set switch to ON
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Mixing rate
Activating the function
● Select the setting item
with the Jog key.
● Switch ON/OFF 表示
3
Position Switch
NULL UP UP&DWN
ON ON
ON
ON OFF OFF
ON OFF ON
2
Position Switch
NULL UP DOWN
ON OFF
ON
ON OFF ON
AIL → Camber mixing
■ Activating the function
① Select the "MIX" item and then select
the "ON" by pressing the + key or –
key.
＋
or
● When you do not use a function, set
to the "INH" side.
WING TYPE
Ailerons operation
② Select
from the menu with the
Jog key.
UP&CNT CENTER CNT&DN DOWN
ON OFF OFF OFF
ON OFF
ON ON
OFF
OFF ON ON
■ Mixing rate
② Select the value item and then
－
1AIL 1AIL1FLP
●When the mixing direction is reversed by the
linkage, adjustments can be made by changing
the rate polarity.
"AL → CMB"
adjust the mixing rate by pressing
the + key or – key.
Range：-120 ～ +120%
Default：0%
● When you want to return the set value to the initial value,
press the + key and – key simultaneously.
(GLIDER)
2AIL 2AIL1FLP 2AIL2FLP
Flaps and ailerons
operate
Roll is corrected by using
the ailerons to control the
camber FLP.
③ Open the setting screen by
pressing the Jog key.
● When not using this function,
select INH.
● When condition was used, the
display can be switched and
each connection can be set by
switching the condition switch.
● The ON/OFF switch can be changed.
( S e l e c t e d w i t h t h e Jog key a n d
changed with the +key)
● Sets the ON/OFF direction of the
selected switch.
＋
or
－
149