FUTABA 6k Instruction Manual page 74

● Viewing the receiver voltage maximum and minimum values.
In the initial state, the receiver voltage maximum and minimum values are displayed in the
transmitter. (Value until reset)
Display
Calling the setting screen
① Select "RX-BATT" from the telemetry
screen with the Jog key.
Receiver voltage MIN
MIN/MAX reset
① Select "MIN/MAX" from the RX-BATT
screen with the Jog key.
WARNING
Do not stare at or set the transmitter setting screen while flying.
■Losing sight of the aircraft during flight is very dangerous.
■When you want to check the information during flight, call the telemetry screen before flight and have the screen
checked by someone other than the operator.
74
② Open the setting screen by
pressing the Jog key.
② Date reset by pressing the
Jog key for 1 second.
● A confirmation "beep"
sounds when complete.
● Receiver → Transmitter.
T h e r e c e p t i o n o f t h e
signal from the receiver to
the transmitter is shown.
This does not affect flight.
Receiver voltage display
Receiver voltage MAX