Sensor:register - FUTABA 6k Instruction Manual

● REGISTER
（When using sensor to which the slot number was changed by other transmitters.）
This function resets a starting slot of a sensor and registers with a transmitter.
Connect the sensor as shown in the figure and register it by the following procedure.
Sensor connect
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
（1 second）
Sensor register
① SENSOR page 2 is chosen by Jog
key.
② Connect a sensor and a battery to the
transmitter.
T6K
"SENSOR"
② Select
from the menu with the Jog
key.
④
Jog key presses side
and makes it 6pages.
Left 1-time
press
③ Press the Jog key for 1 second.
● Confirmation message
"sure?" blinks.
Receiver battery
HUB
Connect a sensor to add
③ Open the setting screen by
pressing the Jog key.
④ Press the Jog key.
● A confirmation "beep"
sounds when complete.
● "COMU-ERROR" : When the number of slots
needed in registration is insufficient, an error is
displayed and registration cannot be performed.
Sensor
87