Camber Mixing - FUTABA 10J Instruction Manual

CAMBR MIX
Function
This function adjusts the rate of camber
operation for the wing camber (ailerons, camber
flaps, brake flaps) in the negative and positive
directions. The aileron, flap, and elevator rates
can also be adjusted independently and attitude
changes caused by camber operation can be
Attitude changes are compen-
sated for by setting the
amount of elevator movement.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
Sets the amount of
movement when
the VR was turned.
● Aileron1
● Aileron2
● Camber MIX ACT/INH
● Can be set to operate
from a switch. When
NULL, it is operated by
a VR.
Sets the amount of
movement when
the VR is turned.
● Flap1
● Flap2
● Flap3
● Flap4
● Elevator
160

Camber mixing

All the wing control surfaces are
lowered and the camber is increased
(lift increases)
② Select
（1 second）
( R A T E 1 ) ： T h e a m o u n t o f
operations when VR is turned to
the right.
[Camber FLP ２page]
WING TYPE 1AIL 2AIL 2AIL+1F 2AIL+2F 2AIL+4F
corrected.
Turn the VR
Attitude changes are compen-
sated for by setting the
amount of elevator movement.
"CAMBR MIX"
from the menu with the
Jog key.
（Currently selected condition）
( R A T E 2 ) ： T h e a m o u n t o f
operations when VR is turned to
the left.
（Currently selected condition）
(GLIDER)
All the wing control surfaces are
raised and the camber is
decreased (lift decreases)
③ Open the setting screen by
pressing the Jog key.
● Select the setting item
with the Jog key.
＋ −
● The number is changed
by + key or ‒ key.
● Amount of compensation
of the elevator when the
camber changed.