Gateway Settings; General Preferences; Feature Codes - Yeastar Technology TA1600 User Manual

Codecs

4.3 Gateway Settings

4.3.1 General Preferences

Items
Ring Timeout
MAX Call Duration
Music On Hold
Key As Send
Enable Jitterbuffer
Jitterbuffer MaxSize

4.3.2 Feature Codes

There are various feature codes on TA FXS Gateway. The feature codes are used to
acquire the gateway info or activate and inactivate supplementary services. The
default feature codes are illustrated below. The parameters for feature codes are
configurable.
TA1600/2400/3200 FXS Gateway User Manual
Default is 1200 seconds.
Enable the codec you want for IAX communication.
Figure 4-20 General Settings
Table 4-11 Description of General Settings
Description
Number of seconds to ring a device before executing
the "Follow me" configurations. This is a gloable
setting for all FXS ports.
The absolute maximum amount of time permitted for a
call. A setting of 0 disables the timeout.
Set hold music for the system.
Set the "#" or "*" to perform as a send key while
dialing. Default is "#".
Forces the use of a jitter buffer on the received side of
a SIP channel. The call quality will be improved if this
option is enabled.
Max length of the jitter buffer. Default is 40
milliseconds
48/60