Firmware Update; Backup And Restore - Yeastar Technology TA1600 User Manual

TA1600/2400/3200 FXS Gateway User Manual
Two Methods are supported for TA FXS Gateway provision: PnP and DHCP.
If DHCP method is selected, you should enable DHCP Server on MyPBX (System→
Network Preferences→DHCP Server).
Figure 3-28 TA FXS Gateway Gateway Auto Provision

3.3.5 Firmware Update

Firmware upgrading is possible through the Administrator Web interface using a
TFTP Server or an HTTP URL. Enter your TFTP Server IP address and firmware file
location, then click "Start" to update the firmware
Notes:
1. If "Reset configuration to Factory Defaults" is enabled, the system will restore to
factory default settings.
2. When updating the firmware, please don't turn off the power. Or the system will get
damaged.
Figure 3-29 Firmware Update

3.3.6 Backup and Restore

We can back up the configurations before resetting TA FXS Gateway to factory
defaults, and then restore it on this package.
Figure 3-30 Backup and Restore
28/60