Yeastar Technology TA1600 User Manual page 42

Items
UDP Port
Enable Random Port
Random Port Update
Interval
TCP Port
TLS Port
TLS Verify Server
TLS Verify Client
TLS Ignore Common
Name
TLS Client Method
RTP Port Start
RTP Port End
DTMF Mode
Max
Registration/Subscription
Time
Min
Registration/Subscription
Time
TA1600/2400/3200 FXS Gateway User Manual
Figure 4-12 SIP General Settings
Table 4-6 Description of SIP General Settings
Description
Port used for SIP registrations. The default is 5060.
Enable or Disable Random SIP port.
Set the Random Port Update Interval.
Port used for SIP registrations. The default is 5060.
Port used for SIP registrations. The default is 5061.
When using TA FXS Gateway as a TLS client, whether
or not to verify server's certificate. It is "No" by default.
When using TA FXS Gateway as a TLS server, whether
or not to verify client's certificate. It is "No" by default.
Set this parameter as "No", then common name must be
the same with IP or domain name.
When using TA FXS Gateway as TLS client, specify the
protocol for outbound TLS connections. You can select
it as tlsv1, sslv2 or sslv3.
Beginning of the RTP port range.
End of the RTP port range.
Set the default mode for sending DTMF. Default setting:
rfc2833
Maximum duration (in seconds) of a SIP registration.
The default is 3600 seconds.
Minimum duration (in seconds) of a SIP registration.
The default is 60 seconds.
42/60