Gateway Settings; General Preferences - Yeastar Technology TA1610 User Manual

https://arttel.ru/

Gateway Settings

This chapter explains Gateway settings, which can be applied globally to TA1610. The
gateway settings can be configured under Gateway→ Gateway Settings.


General Preferences

General Preferences
General Settings
MAX Call Duration
G723 Encoding Rate
FXO Mode
Voice Settings
Enable Jitterbuffer
Jitter Buffer MaxSize
VAD
Echo Tail Length
https://arttel.ru/shop/voip-shlyuzy/yeastar-neogate-ta1610
Figure 6-1 General Preferences
Table 6-1 General Preferences
The absolute maximum amount of time permitted for a
call. A setting of 0 disables the timeout.
Set the G723 encoding rate.
Select country to set the On Hook Speed, Ringer
Impedance, Ringer
TIP/RING voltage adjustment, Minimum Operational
Loop Current, and AC Impedance as predefined for
your country's analog line characteristics. The default
setting is "FCC".
Forces the use of a jitter buffer on the received side of
a SIP channel. The call quality will be improved if this
option is enabled.
Max length of the jitter buffer in milliseconds.
Default: 40.
Voice Activity Detection.
In some cases, the echo canceller doesn't train quickly
enough and there is echo at the beginning of the call
which then quickly fades out.
TA1610 User Manual
Threshold, Current Limiting,
32/62