Yeastar Technology TA1600 User Manual page 32

 General
Table 4-1 Description of FXS Port General Settings
Items
Port
General
Number
Primary Server
Failover Server
User Name
Authentication
VoIP Serer Name
Template
Password
From User
Online Number
Dial Pattern Template
Enable Hotline
Hotline
Hotline Number
Delay Dial
Flash
Call Duration Setting
TA1600/2400/3200 FXS Gateway User Manual
Description
The corresponding port.
User account number.
Choose the Primary VoIP server, where the
account will be registered.
Choose the failover server for the account. This
server will be used if the primary server is
unavailable.
Username of the account. Used for VoIP trunk
registration. The user name should be entered if
the "Enable Register" is checked on the VoIP
Server.
Used for SIP authentication. The authentication
name should be entered if "Enable Register" is
checked on the VoIP Server.
Password of the SIP account. The password
should be entered if "Enable Register" is
checked on the VoIP Server.
All outgoing calls from this SIP Trunk will use the
"From User" (in this case the account name for
SIP Registration) in From Header of the SIP
Invite package. Keep this field blank if not
needed.
Define the online number that expected
by "Skype Connect" and some other SIP service
providers. Leave this field blank if not needed.
The account will be allowed to make outbound
calls according to the selected template.
Select whether to use Hotline or not. Hotline is
disabled by default. If this feature is enabled, the
system will dial out the hotline number
automatically after off-hook.
Set the number to dial out automatically after
off-hook.
Define how long to make Hotline take effect after
you pick up the phone.
Sets the amount of time, in milliseconds, that a
hook flash must remain depressed in order for
the system to consider it as a valid flash event.
Default: 1000ms.
Set up the max cull duration for every call of this
32/60