Call Hold; Call Waiting; Call Transfer - Yeastar Technology TA1600 User Manual

TA1600/2400/3200 FXS Gateway User Manual
FXS port 1 to another phone which is connected to FXS port2, you need to dial *9902
on the phone.
The user connected to port 16 can be reached by dialing *9916 on the phone.

3. Call Hold

An active call can be held by pressing "flash" key on the analog phone. Press the key
again to resume the call.
If there is no "flash" key on the phone, you can use "hook flash" (quickly toggle on-off
hook) to hold a call. The call may be disconnected by chance if using "hook flash".

4. Call Waiting

If the call waiting is activated for the FXS port, the FXS user who is in a call can hear a
call waiting tone "beep" when there is a new incoming call. The user can press "hook
flash" to toggle between the active call and the incoming call.

5. Call Transfer

Blind transfer and attended transfer are supported on TA FXS Gateway. Users can
achieve call transfer by pressing the feature code during the call.
Blind Transfer
Default feature code: *03
1. Dial "*03" during the call;
2. Dial the called number after hearing a prompt "transfer";
3. The call will be transferred after the number is dialed.
58/60