Yeastar Technology TA1600 User Manual page 34

Call forwarding for an extension can be configured here. You can also
configure call forwarding to a hunt group.
Follow me Prompt: whether the prompt is played or not when the call is
transfered.
Music On Hold: choose the on hold music.
Settings for the FXS port volume.
Volume
Rxgain: adjust receive gain.
Settings
Txgain: adjust transmit gain.
Caller ID Select the type of caller ID signaling. FSK and DTMF signal is
Settings supported.
If the FXS port is connected to a Fax machine, this option should be
Fax
checked.
Message Waiting Indicator (MWI) refers to a special LED on the analog
phone, which indicates the voice mail status. There are three lighting
MWI methods supported on TA FXS Gateway gateway: neon, FSK and
Settings Polarity. Choose the lighting method according to your phone. TA FXS
Gateway gateway will light the lamp up once receiving a new message;
the lamp will goes off if there is no unread voice mail.
A polarity signal is required on some systems for reverse polarity
billing. Select if reverse polarity signal is activated on this FXS port. It is
not activated by default.
Ploarity
Polarity Answer: Whether to send polarity signal while picking up the
Settings
phone.
Polarity Hangup: Whether to send polarity signal while hanging up the
phone.
TA1600/2400/3200 FXS Gateway User Manual
34/60